Region Button
The Region Button may be associated with any two-state
audio or logic object such as a mute button or a logic
source. Drag and drop the control you wish to associate
from a control panel or the design pane on to the Region
Button. The size and shape of the Region Button can be
changed by moving the red handles which are shown when
the object is selected. These turn points can be removed
by left clicking on a handle whilst holding the shift
key. Turn points may also be added by left clicking on
a handle whilst holding the ctrl key, these will appear
at a clockwise position from the selected handle.
The operation and appearance of the Region Button can be customized from the properties pane, for example the object can be set as a read/write button or as an indicator. A 'Wave file' can also be assigned from the Gallery to give an audible indication when the Region Button is 'on'.
Properties
Stop Sound on Off
Terminates sound when in the Off state.
Override On Value
If enabled you can override the On value, othrwise On equals the maximum value.
On Value
Sets the value to be considered as On.
Tri-State
Enable this to allow parameters with three values to act as a tri-state on/off.
Flash On
If enabled, flashes the indicator when the parameter is On.
Type
Sets the type of button to be used. Normal, latching, momentary or timed.
Inverse
Reverses the operation of the button.
Switch State on Button Down
When set to Yes switches the state of the button as soon as the mouse button is pressed.
Timeout (multiples of 100ms)
Sets the delay time before the button changes state.
Read Only (Indicator)
When set to Yes the button will ignore button clicks and act as an indicator only.
Disable Wipe
When set to Yes, wipe will be disabled.
Bump Percent
The amount to bump up or down as a percentage of the parameter range.
Off Colour
Sets the display colour when the button is in the Off state.
Off Opacity
Sets the opacity of the button in the Off state.
On Colour
Sets the display colour when the button is in the On state.
On Opacity
Sets the opacity of the button in the On state.
Snap To Grid
When set to Yes, changes to the size of the button will snap to the nearest grid size.
Show Outline
When set to Yes, the button background will not be visible in design mode.