Logic
Delay
The output of the
logic delay will follow the input but will be delayed according to the
values set in properties. The delay following a low level at the input
can be set independently of that for a high level at the input.
The Logic Delay
does NOT function as an audio delay.
The lights on the
logic object design block indicate the current state of the input and
output. These are operational in simulation and when online to the device.
Properties
Delay On (x 100ms)
The delay time before
the output signal turns ON after the input signal goes high.
Delay Off (x
100ms)
The delay time before
the output signal turns OFF after the input signal goes low.
The Delay ON/OFF
is set in increments of 100ms, for example a setting of 3 equals 300ms.