Event Log Monitor Event IDs

The following are the Categories and Event IDs for the Crown amps.

Macro Tech - i Series

Category	Event	Message	Aux	Network
16	1	Line Voltage Below Limit		x
16	2	Line Voltage Above Limit		x
16	3	Power Supply Temperature Above Limit		x
16	4	Channel 1 Temperature Above Limit		x
16	5	Channel 2 Temperature Above Limit		x
16	6	Channel 1 Input Clipped		x
16	7	Channel 2 Input Clipped		x
16	8	Channel 1 Output Clipped		x
16	9	Channel 2 Output Clipped		x
16	10	Ch1 Load Impedance Below Limit		x
16	11	Ch1 Load Impedance Above Limit		x
16	12	Ch2 Load Impedance Below Limit		x
16	13	Ch2 Load Impedance Above Limit		x
16	14	Fan Error		x

USP3(/CN)

Category	Event	Message	Aux	Network
16	1	TDH above limit on Channel 1	x	x
16	2	TDH above limit on Channel 2	x	x
16	3	Excessive Clipping on Channel 1	x	x
16	4	Excessive Clipping on Channel 2	x	x
16	5	Fault on Channel 1	x	x
16	6	Fault on Channel 2	x	x
16	7	Load below limit on Channel 1	x	x
16	8	Load above limit on Channel 1	x	x
16	9	Load below limit on Channel 2	x	x
16	10	Load above limit on Channel 2	x	x
16	11	AC line voltage below limit	x	x
16	12	AC line voltage above limit	x	x
16	27	Component at max workload	x	x
16	28	CobraNet audio dropout on RxX, bundle YYY
16	40	SLM impedance test: failure on Channel 1		x
16	40	SLM impedance test: setup error on Channel 1		x
16	40	SLM impedance test: insufficient signal level on Channel 1		x
16	40	SLM freq resp test: failure on Channel 1		x
16	40	SLM freq resp test: setup error on Channel 1		x
16	40	SLM freq resp test: insufficient signal level on Channel 1		x
16	40	SLM reference curve acquisition: insufficient signal level on Channel 1		x
16	40	SLM impedance test: failure on Channel 2		x
16	40	SLM impedance test: setup error on Channel 2		x
16	40	SLM impedance test: insufficient signal level on Channel 2		x
16	40	SLM freq resp test: failure on Channel 2		x
16	40	SLM freq resp test: setup error on Channel 2		x
16	40	SLM freq resp test: insufficient signal level on Channel 2		x
16	40	SLM reference curve acquisition: insufficient signal level on Channel 2		x
16	13	Pilot tone current below threshold on channel 1	x	x
16	14	Pilot tone current below threshold on channel 2	x	x
16	15	Pilot tone current above threshold on channel 1	x	x
16	16	Pilot tone current above threshold on channel 2	x	x

PIP-Lite

Category	Event	Message	Aux	Network
16	1	Thermal Reserve above limit on Ch 1	x	x
16	2	Thermal Reserve above limit on Ch 2	x	x
16	3	Excessive Clipping on Ch 1	x	x
16	4	Excessive Clipping on Ch 2	x	x
16	5	Fault on Ch 1	x	x
16	6	Fault on Ch 2	x	x
16	7	Load below limit on Ch 1	x	x
16	8	Load above limit on Ch 1	x	x
16	9	Load below limit on Ch 2	x	x
16	10	Load above limit on Ch 2	x	x
16	11	AC line voltage below limit	x	x
16	12	AC line voltage above limit	x	x

PIP-BLU

Category	Event	Message	Aux	Network
16	1	Line Voltage Below Limit		x
16	2	Line Voltage Above Limit		x
16	3	Channel 1 Temperature Above Limit		x
16	4	Channel 2 Temperature Above Limit		x
16	5	Channel 1 Input Clipped		x
16	6	Channel 2 Input Clipped		x
16	7	Channel 1 Output Clipped		x
16	8	Channel 2 Output Clipped		x
16	9	Channel 1 Load Impedance Below Limit		x
16	10	Channel 1 Load Impedance Above Limit		x
16	11	Channel 2 Load Impedance Below Limit		x
16	12	Channel 2 Load Impedance Above Limit		x
19	97	Blu Link Master Change Event
19	99	Blu Link Sync Change Event
19	100	Blu Link Audio Event
19	101	Blu Link Error Event

USP4CN

Category	Event	Message	Aux	Network
16	1	Line Voltage Below Limit	x	x
16	2	Line Voltage Above Limit	x	x
16	3	Channel 1 Temperature Above Limit	x	x
16	4	Channel 2 Temperature Above Limit	x	x
16	5	Channel 1 Analog Input Clipped		x
16	6	Channel 2 Analog Input Clipped		x
16	7	Channel 1 AES Input Clipped		x
16	8	Channel 2 AES Input Clipped		x
16	9	Channel 1 CobraNet Input Clipped		x
16	10	Channel 2 CobraNet Input Clipped		x
16	11	Channel 1 Processing Output Clipped	x	x
16	12	Channel 2 Processing Output Clipped	x	x
16	13	Channel 1 Amplifier Output Clipped	x	x
16	14	Channel 2 Amplifier Output Clipped	x	x
16	15	Ch1 Load Impedance Below Limit	x	x
16	16	Ch1 Load Impedance Above Limit	x	x
16	17	Ch2 Load Impedance Below Limit	x	x
16	18	Ch2 Load Impedance Above Limit	x	x
16	19	SLM impedance test: failure on Channel 1	x	x
16	20	SLM impedance test: failure on Channel 2	x	x
16	21	SLM impedance test: setup error on Channel 1	x	x
16	22	SLM impedance test: setup error on Channel 2	x	x
16	23	SLM impedance test: insufficient signal level on Channel 1	x	x
16	24	SLM impedance test: insufficient signal level on Channel 2	x	x
16	25	SLM freq resp test: failure on Channel 1	x	x
16	26	SLM freq resp test: failure on Channel 2	x	x
16	27	SLM freq resp test: setup error on Channel 1	x	x
16	28	SLM freq resp test: setup error on Channel 2	x	x
16	29	SLM freq resp test: insufficient signal level on Channel 1	x	x
16	30	SLM freq resp test: insufficient signal level on Channel 2	x	x
16	31	SLM reference curve acquisition: insufficient signal level on Channel 1	x	x
16	32	SLM reference curve acquisition: insufficient signal level on Channel 2	x	x
16	33	Channel 1 Pilot tone Below threshold	x	x
16	34	Channel 2 Pilot tone Below threshold	x	x
16	35	Channel 1 Pilot tone Above threshold	x	x
16	36	Channel 2 Pilot tone Above threshold	x	x
16	37	Channel 1 Source changed to High priority input		x
16	38	Channel 2 Source changed to High priority input		x
16	39	Channel 1 Source changed to Medium priority input		x
16	40	Channel 2 Source changed to Medium priority input		x
16	41	Channel 1 Source changed to Low priority input		x
16	42	Channel 2 Source changed to Low priority input		x

MC-CN

Category	Event	Message	Aux	Network
16	1	CobraNet audio dropout on RxX, bundle YYY
16	11	TDH above limit on Channel 1	x	x
16	12	TDH above limit on Channel 2	x	x
16	13	TDH above limit on Channel 3	x	x
16	14	TDH above limit on Channel 4	x	x
16	15	TDH above limit on Channel 5	x	x
16	16	TDH above limit on Channel 6	x	x
16	17	TDH above limit on Channel 7	x	x
16	18	TDH above limit on Channel 8	x	x
16	21	Excessive Clipping on Channel 1	x	x
16	22	Excessive Clipping on Channel 2	x	x
16	23	Excessive Clipping on channel 3	x	x
16	24	Excessive Clipping on channel 4	x	x
16	25	Excessive Clipping on channel 5	x	x
16	26	Excessive Clipping on channel 6	x	x
16	27	Excessive Clipping on channel 7	x	x
16	28	Excessive Clipping on channel 8	x	x
16	31	Fault on Channel 1	x	x
16	32	Fault on Channel 2	x	x
16	33	Fault on Channel 3	x	x
16	34	Fault on Channel 4	x	x
16	35	Fault on Channel 5	x	x
16	36	Fault on Channel 6	x	x
16	37	Fault on Channel 7	x	x
16	38	Fault on Channel 8	x	x
16	41	Load below limit on Channel 1	x	x
16	42	Load above limit on Channel 1	x	x
16	43	Load below limit on Channel 2	x	x
16	44	Load above limit on Channel 2	x	x
16	45	Load below limit on channel 3	x	x
16	46	Load above limit on channel 3	x	x
16	47	Load below limit on channel 4	x	x
16	48	Load above limit on channel 4	x	x
16	49	Load below limit on channel 5	x	x
16	50	Load above limit on channel 5	x	x
16	51	Load below limit on channel 6	x	x
16	52	Load above limit on channel 6	x	x
16	53	Load below limit on channel 7	x	x
16	54	Load above limit on channel 7	x	x
16	55	Load below limit on channel 8	x	x
16	56	Load above limit on channel 8	x	x
16	61	Line Voltage out of range		x
16	71	Power Supply: Temperature above limit.
16	81	Bridge Switch: Has changed positions on the channel 1-2 pair.	x	x
16	82	Bridge Switch: Has changed positions on the channel 3-4 pair.	x	x
16	83	Bridge Switch: Has changed positions on the channel 5-6 pair	x	x
16	84	Bridge Switch: Has changed positions on the channel 7-8 pair.	x	x
16	90	Component at max workload
16	91	Pilot tone current below threshold on channel	x	x
16	92	Pilot tone current below threshold on channel 2	x	x
16	93	Pilot tone current below threshold on channel 3	x	x
16	94	Pilot tone current below threshold on channel 4	x	x
16	95	Pilot tone current below threshold on channel 5	x	x
16	96	Pilot tone current below threshold on channel 6	x	x
16	97	Pilot tone current below threshold on channel 7	x	x
16	98	Pilot tone current below threshold on channel 8	x	x
16	101	The Input Pot Position of Channel 1 is not within range of the preferred value	x	x
16	102	The Input Pot Position of Channel 2 is not within range of the preferred value	x	x
16	103	The Input Pot Position of Channel 3 is not within range of the preferred value.	x	x
16	104	The Input Pot Position of Channel 4 is not within range of the preferred value.	x	x
16	105	The Input Pot Position of Channel 5 is not within range of the preferred value.	x	x
16	106	The Input Pot Position of Channel 6 is not within range of the preferred value	x	x
16	107	The Input Pot Position of Channel 7 is not within range of the preferred value.	x	x
16	108	The Input Pot Position of Channel 8 is not within range of the preferred value	x	x
16	121	Pilot tone current above threshold on channel	x	x
16	122	Pilot tone current above threshold on channel 2	x	x
16	123	Pilot tone current above threshold on channel 3	x	x
16	124	Pilot tone current above threshold on channel 4	x	x
16	125	Pilot tone current above threshold on channel 5	x	x
16	126	Pilot tone current above threshold on channel 6	x	x
16	127	Pilot tone current above threshold on channel 7	x	x
16	128	Pilot tone current above threshold on channel 8	x	x

I-Tech HD

Category	Event	Message	Aux	Network
16	1	Line Voltage Below Limit		x
16	2	Line Voltage Above Limit		x
16	3	Power Supply Temperature Above Limit		x
16	4	Channel 1 Temperature Above Limit		x
16	5	Channel 2 Temperature Above Limit		x
16	6	Channel 1 Analog Input Clipped		x
16	7	Channel 2 Analog Input Clipped		x
16	8	Channel 1 AES Input Clipped		x
16	9	Channel 2 AES Input Clipped		x
16	10	Channel 1 CobraNet Input Clipped		x
16	11	Channel 2 CobraNet Input Clipped		x
16	12	Channel 1 Processing Output Clipped		x
16	13	Channel 2 Processing Output Clipped		x
16	14	Channel 1 Amplifier Output Clipped		x
16	15	Channel 2 Amplifier Output Clipped		x
16	16	Ch1 Load Impedance Below Limit		x
16	17	Ch1 Load Impedance Above Limit		x
16	18	Ch2 Load Impedance Below Limit		x
16	19	Ch2 Load Impedance Above Limit		x
16	20	Fan Error		x
16	21	SLM impedance test: failure on Channel 1		x
16	22	SLM impedance test: failure on Channel 2		x
16	23	SLM impedance test: setup error on Channel 1		x
16	24	SLM impedance test: setup error on Channel 2		x
16	25	SLM impedance test: insufficient signal level on Channel 1		x
16	26	SLM impedance test: insufficient signal level on Channel 2		x
16	27	SLM freq resp test: failure on Channel 1		x
16	28	SLM freq resp test: failure on Channel 2		x
16	29	SLM freq resp test: setup error on Channel 1		x
16	30	SLM freq resp test: setup error on Channel 2		x
16	31	SLM freq resp test: insufficient signal level on Channel 1		x
16	32	SLM freq resp test: insufficient signal level on Channel 2		x
16	33	SLM reference curve acquisition: insufficient signal level on Channel 1		x
16	34	SLM reference curve acquisition: insufficient signal level on Channel 2		x