Soundweb London Control Options
Even when the PC is disconnected from the Soundweb system, it is still possible to adjust audio settings and activate Presets using:
Switches and knobs hard wired to the control inputs.
The Soundweb BLU-10 network remote control panel.
The Soundweb BLU-8 programmable wall controller
The Soundweb BLU-8 V2 programmable wall controller
- Proprietary control systems such as AMX and Crestron.
BLU-80/BLU-800/BLU-100 Series - Control Inputs and Logic Outputs introduction
A Soundweb system can be controlled and monitored without an ' online' PC using devices connected to the 'control inputs' and 'logic outputs'. A switch or potentiometer, e.g. BLU-3 selector wall plate connected to a control input, can do anything that could be done with a switch, fader or rotary knob on a control panel in the Architect software.
A Soundweb London BLU-80 / BLU-800 series has a set of 12 control inputs, 6 logic outputs and an opto-isolator circuit. These are pins as part of a 24 way connector at the rear of the device (the other pins are common/ground or reference for completing circuits).
BLU-GPX - Control Inputs and Logic Outputs introduction
A Soundweb London BLU-GPX can be controlled and monitored without an 'online' PC using devices connected to the 'control inputs', 'logic outputs' and ‘Relay Outputs’. A switch or potentiometer, e.g. BLU-3 selector wall plate connected to a control input, can do anything that could be done with a switch, fader or rotary knob on a control panel in the London Architect software.
The BLU-GPX has a set of 36 control inputs, 23 logic outputs, 8 relay outputs and an opto-isolator circuit. These are pins as part of 12, 12-pin connectors at the rear of the device (the other pins are common/ground or reference for completing circuits).
See Also
Control Inputs
Logic Outputs