BLU-800/BLU-805/BLU-806/BLU-160/BLU-320/BLU-325/BLU-326/BLU-120 Network Specifications

Control Network (All Models)


Connectors	RJ45 Ethernet connector
Maximum cable length	100m/328ft on Category 5e cable between device and Ethernet switch


Connectors	2 x RJ45 Ethernet connectors
Maximum cable length	100m/328ft on Category 5e cable between devices
Maximum number of nodes	60
Latency	11/Fs (0.23ms @ 48k, 0.11ms @ 96k)
Pass Through Latency	4/Fs (0.08ms @ 48k, 0.04ms @ 96k)


Connectors	2 x RJ45 Ethernet connectors
Maximum cable length	100m/328ft on Category 5e cable between device and Ethernet switch
Sample Rate	48kHz and 96kHz
Latency	1.33ms to 5.33ms


Connectors	2 x RJ45 Ethernet connectors - NOTE: The secondary port is not currently enabled. It will be enabled in a future release of HiQnet London Architect.
Maximum cable length	100m/328ft on Category 5e cable between device and Ethernet switch
Sample Rate	48kHz
Latency	2ms
Compatible AVB Switches	BSS Audio/NETGEAR GS724T Ethernet Switch LABX Titaniun 411 Ruggedized AVB Ethernet Bridge Switch


Connectors	2 x RJ45 Ethernet connectors
Maximum cable length	100m/328ft on Category 5e cable between device and Ethernet switch
Sample Rate	48kHz and 96kHz
Latency	0.15ms to 5.0ms

The left LED indicator is steady green to indicate a network link and flashes green to indicate network activity.

If a recoverable error condition is encountered it will become red and if the error is unrecoverable, it will flash red.

The right indicator lights green on the CobraNet port in use and lights yellow if it is the conductor.

The left LED indicator lights yellow on the CobraNet port in use and will blink if the device is also the conductor

The right indicator is green when a link is established and flashes green to indicate network activity.

Both right indicators flash yellow in unison to report an error.